FLIR RS8513-HS InSb High-Speed MWIR Camera for Range & Science Applications
The FLIR RS8513-HS MWIR infrared camera system is a tall-undertaking thermal imaging camera and infrared telescope entire sum in a single weatherproof housing, specifically meant for long-range tracking and measurement applications including military range, aerospace, and outside research. Built on a tall-resolute 1280 1024 midwave indium antimonide detector subsequent to than the carrying out to speak to data going on to 180 frames per second, the RS8513-HS InSb provides 24% more pixels and a 46% faster frame rapidity than the previous model. Multiple simultaneous data and video output options make a clean breast the camera to be easily integrated into most data acquisition systems. If you are looking for this, you may Explore the FLIR RS8513-HS InSb high-speed MWIR camera and its latest price in Bangladesh for advanced research and industrial applications.
Key Features: FLIR RS8513-HS InSb High-Speed MWIR Camera for Range & Science Applications
- Advanced Features for Optimal Flexibility
This high-performance infrared camera features a 10X continuous zoom lens with TSPI-accurate time stamping of images and metadata all in a single weatherproof housing
- Superior Resolution and Measurement Accuracy
Easily capture high-speed thermal data in full HD resolution on long-range and high-temperature targets with the 1.3 megapixel MWIR indium antimonide detector and internal warm filter wheel
- Simplified Data Analysis, Sharing, and Collaboration
View, record, and analyze data easily in FLIR Research Studio using the available 10 GigE, or CoaxPress digital data connection options while having full control over the advanced triggering and synchronization capabilities
Specifications: FLIR RS8513-HS InSb High-Speed MWIR Camera for Range & Science Applications
Resolution
1280 × 1024
Detector Pitch
12 μm
Spectral Range
3.0–5.0 μm
Detector Type
Indium antimonide
Camera f-number
f/5
Thermal Sensitivity/NETD
25 mK typical
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 181 Hz
Integration Time
270 ns to ~full frame
ND Filter Wheel
4-position motorized filter wheel, standard 1-inch ND filters must be factory installed
Focus
Motorized FOV/focus
Imaging & Optical
Analog Overlay
Customizable (ability to toggle off)
Camera f-number
f/5
Detector Pitch
12 μm
Detector Type
Indium antimonide
Digital Zoom
1x, Auto (best fit)
Focus
Motorized FOV/focus
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 181 Hz
Image Time Stamp
Internal precision timestamp. IRIG-B AM decoder, TSPI accurate
Integration Time
270 ns to ~full frame
Lens
120 mm to 1200 mm zoom (metric, low-latency metadata)
Lens Cover
Optional, motorized
ND Filter Wheel
4-position motorized filter wheel, standard 1-inch ND filters must be factory installed
Operability
>99.5% (99.9% typical)
Palette
Selectable 8-bit
Pixel Clock
355 mHz
Radiometric Data Streaming
Simultaneous 10 Gigabit Ethernet (GigE Vision) CoaXPress (CXP 2.0) Single link @ 10 GBPS or Dual Link @ 5 GBPS
Readout Modes
Asynchronous integrate while read; Asynchronous integrate then read
Readout Type
Snapshot
Resolution
1280 × 1024
Sensor Cooling
Closed cycle linear
Spectral Range
3.0–5.0 μm
Standard Video
HD-SDI
Subwindow Modes
Flexible windowing down to 64 × 4 (steps of 64 columns, 4 rows)
Thermal Sensitivity/NETD
25 mK typical
Video Modes
HD-SDI: 720p@50/59.9 Hz, 1080p@25/29.9 Hz, 1080p@60 Hz, 50 Hz
Measurement & Analysis
Automatic Gain Control
Manual, Linear, Plateau Equalization, ROI, DDE
Camera size (L x W x H)
889 × 308 × 312 mm (35 × 12.125 × 12.3 in)
Communication & Data Storage
Command and Control
10 Gigabit Ethernet, RS-232 Serial, CoaXPress
Synchronization Modes
Sync In, Sync Out, Tri-Level, Video
Trigger Mode(s)
Trigger In, Software generated, Time generated
General
Weight
Approximately 43.2 kg (95 lbs) without motorized lens cover
Power
Power
24 V nominal, 20-28 V acceptable
Environmental & Certifications
Chassis IP Rating
IP65
Mounting
15 x 3/8”-16 tapped holes
Operating Temperature Range
-20°C to 50°C (-4°F to 122°F )