Model: Fluke Fluke FoodPro Plus Thermometer Replacement Probe
Fluke FoodPro Plus Thermometer Replacement Probe Is providing a Built-in fold-out probe for measuring internal food temperatures. It's accurate rugged, reliable and trusted. So you may but it confidently.
Fluke brings its exam and measurement equipment to perform to the foodservice industry forward entry and non-entre temperature measurement solutions. The Fluke FoodPro Plus thermometer provides an append taking place temperature measurement and monitoring unmodified for foodservice professionals.
It includes one useful temperature inspection tool, which is intended to enable foodservice professionals to speedily and adeptly appear in food product temperatures and to forward detect potential food safety problems.
The Fluke FoodPro Plus combines the same infrared surface temperature scanner, as swiftly as a scrutinize thermometer and integrated countdown timer for supreme inspections of food temperatures and monitoring cooking and cooling intervals.
The Fluke FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which suddenly indicate safe or potentially unsafe holding temperatures gone either green or red lights.
Tools Bangladesh had to the major group of companies buy selling reliably accruable and best products.
Features
Key features: Fluke FoodPro Plus Thermometer Replacement Probe
Fluke FoodPro Plus Food Safety Thermometer
The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals.
Includes all of the FoodPro features, plus the following:
- Built-in fold-out probe for measuring internal food temperatures
- Probe temperature range -40 to 200 °C
- Countdown timer to monitor cooking, cooling and HACCP exposure times
- Backlit display for clear readings in poorly lit areas
- MAX temperature displayed for quick reference
Specifications
Specifications: Fluke FoodPro Plus Thermometer Replacement Probe
| Infrared Specifications |
| Temperature |
-35°C to 275°C |
| Accuracy |
(Assumes ambient operating temperature of 23°C ±2°) |
| Between 0°C and 65°C: ±1°C |
| Below 0°C: ±1° ±0.1 degree/degree |
| Above 65°C): ±1.5% of reading |
| Response time |
< 500 ms after initial reading |
| Spectral response |
8-14 microns |
| Emissivity |
Pre-set for foodservice applications |
| Distance to spot size/Optical resolution (D:S) |
2.5:1 @ 90% energy, typical |
| Typical working range (target illumination) |
≈25 mm to 250 mm |
| Minimum target size |
12 mm ø |
| Illumination to IR channel offset |
13 mm |
| Probe Specifications |
| Temperature |
-40°C to 150°C |
| Accuracy |
(Assumes ambient operating temperature of 23°C ±2°) |
| Between –5°C and 65°C: ±0.5°C |
| Below –5°C: ±1°C |
| Above 65°C: ±1% of reading |
| Response time |
7-8 seconds (3 time constants) |
| Probe dimensions |
Diameter: 3.0 mm |
| Length: 90 mm |
| Sensor type |
Thin-film platinum, class A, Resistance |
| Thermal device (RTD) |
| Operational Specifications |
| Repeatability |
Within accuracy specifications of the unit |
| Ambient operating range |
0°C to 50°C |
| Relative humidity |
90% (±5%) RH non condensing @ 30°C |
| Storage temperature |
-20°C to 60°C |
| Weight |
150 g (with battery) |
| Dimensions |
165 x 32 x 50 mm |
| Power, battery life |
9 V alkaline |
| Battery life |
Alkaline: 10 hours minimum @ 23°C |
| Target illumination |
High brightness LED |
| Display resolution |
4 digits, 0.1°C |
| Displayhold (7seconds) |
Yes |
| LCD backlit display |
Yes |
| Temperature display |
4 digits, 0.1°C resolution |
| Maximum temperature displayed |
Yes |
| Timer |
Yes |
| Environmental data |
IP54 sealing (hand-washable, non-submersible) |
| Other Specifications (both) |
| Calibration certificate |
Calibration accuracy with NIST and DKD traceability |
| Standards |
Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) |
| Certifications |
CE NSF |
| Warranty |
2 years |
| Options/Accessories |
Replacement probe |
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody.
Specifications subject to change without notice. |
