Model: Fluke 373 True-RMS AC Clamp Meter
Fluke 373 True-RMS AC Clamp Meter is a top-performing True-RMS current clamp for AC-only current measurements to 600 A. Working with the best and it will be your right choice. This product is limited stock so never mistake it.
Fluke 373 True RMS AC Clamp Meter does the job for any AC-and no-one else current measurement application
This Fluke tools True-RMS AC Clamp Meter is an enjoyable option for AC-unaccompanied current measurement situations. Featuring True RMS AC voltage and current measurements you can pretense AC current to 600 A and AC voltage to 600V. The 373 along with trial DC voltage to 600 V and resistance to 6000.
To make it even easier to use, the large, easy-to-get along in the middle of the backlit display provides greater than before visibility in dimly lit conditions. And the 373 automatically sets the exact measurement range based upon the voltage to say in the back you facility going on, for that defense you realize not dependence to disturbance the switch even though taking a measurement. When you put it all together, you'll locate the Fluke 373 offers anything you habit, pro a tiny more.
Tools Bangladesh is offering the best working product and recently this product is very popular in the market place so, you can take it out now.
Key features: Fluke 373 True-RMS AC Clamp Meter
- A top performing True-RMS current clamp for AC-only current measurements to 600 A
- Measures AC and DC voltage to 600 V
- Measures resistance to 6000 Ω with continuity detection
- Offers state of the art signal processing to provide stable readings even in noisy electrical environments
Specifications: Fluke 373 True-RMS AC Clamp Meter
| Electrical Specifications |
| AC Current |
| Range |
600.0 A |
| Resolution |
0.1 A |
| Accuracy |
2 % ± 5 digits (48 – 62 Hz) |
| Crest Factor (50/60 Hz) |
2.5 @ 600 A |
| AC Voltage |
| Range |
600.0 V |
| Resolution |
0.1 V |
| Accuracy |
1.0 % ± 5 digits (48 – 62 Hz) |
| DC Voltage |
| Range |
600.0 V |
| Resolution |
0.1 V |
| Accuracy |
1 % ± 5 digits |
| Resistance |
| Range |
600.0 Ω/6000 Ω |
| Resolution |
0.1 Ω/1 Ω |
| Accuracy |
1 % ± 5 digits |
| Continuity Beeper |
30 Ω |
| Capacitance |
| Range |
10.0 – 100.0 μF / 1000 μF |
| Resolution |
0.1 μF/1 μF |
| Accuracy |
1.9 % ± 2 digits |
| Mechanical Specifications |
| Size (L x W x H) |
232 mm x 85 mm x 45 mm |
| Weight |
370 g |
| Environmental Specifications |
| Operating Temperature |
-10 °C to +50 °C |
| Storage Temp |
-40 °C to +60 °C |
| Operating Humidity |
Non condensing (< 10 °C)
≤ 90 % RH (at 10 °C to 30 °C)
≤ 75 % RH (at 30 °C to 40 °C)
≤ 45 % RH (at 40 °C to 50 °C)
(Without Condensation) |
| Operating Altitude |
3000 meters |
| Storage Altitude |
12,000 meters |
| EMI, EMC |
Meets all applicable requirements in EN61326-1:2006 |
| Temperature Coefficients |
Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C |
| Safety Compliance |
ANSI/ISA S82.02.01:2004
CAN/CSA-C22.2 No. 61010-1-04
IEC/EN 61010-1:2001, 600V CAT III, 300V CAT IV
Pollution Degree 2
EN/IEC 61010-2-32:2002
EN/IEC 61010-031:2002/A1:2008 |
| Agency Approvals |
|
| Batteries |
2 AA, NEDA 15A, IEC LR6 |
Includes:Fluke 373 True-RMS AC Clamp Meter
- Coated instruction card
- Safety information sheet
- Soft carrying case
- TL75 test leads
- Five AA Alkaline batteries
Accessories: Fluke 373 True-RMS AC Clamp Meter
Clips (3)
Fluke AC220 SureGrip™ Alligator Clips
Fluke AC87 Heavy Duty Bus Bar Clip Set
Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Lights (2)
Fluke LVD1A Non-Contact Voltage Tester with LED Flashlight
Fluke L206 Deluxe LED Hat Light
Test leads (3)
Fluke TL220 SureGrip™ Industrial Test Lead Set
Fluke TL75 Hard Point™ Test Lead Set
Fluke TL175 TwistGuard™ Test Leads
Test probes (1)
Fluke TP1 Slim Reach Test Probes