Key Features: FLIR A6301 Advanced Thermal Camera

• Consistent Performance

  A highly sensitive, cooled MWIR sensor allows the camera to more accurately spot defects, increasing product quality. Industry-leading 27,000-hour cryocooler lifetime maximizes camera uptime for consistent production throughput.

• Designed for Inspection

  Fast integration times ensure accurate temperature measurements on moving products and production lines. Low-latency, deterministic synchronization to external sources means thermal images are captured precisely when needed for decision support.

• Ready for Automation

  Standard GigE Vision protocols, Rest API and a built-in web interfaces shorten implementation timelines.

Specifications: FLIR A6301 Advanced Thermal Camera

Digital I/O connector type

M12 12-pin A-coded, Male (shared with external power)

Digital Inputs

2x opto-isolated, Vin(low)= 0–1.5 V, Vin(high)= 3–25 V

Digital Outputs

3x opto-isolated, 0–48 V DC, max. 350 mA; solid-state opto relay; 1x dedicated as Fault output (NC)

EMC

EN55032:2015/A11:2020
EN55035:2017/A11:2020
FCC Part 15, Subpart B ClassA
KC C 9832 and KS C 9835

Mounting

With mounting plate - 2 × 1/4"-20 tapped holes, 1 × 3/8"-16; tapped hole, 4 × #10-24 tapped holes Without mounting plate - 6 × #6-32

f-number

f/2.5

Image Frequency

30 Hz

Thermal Sensitivity/NETD

≤15 mK at 25°C

Accuracy

≤100°C ±2°C, >100°C ±2% of reading

Communication & Data Storage

Command and Control

GEV: Genicam; RTSP: Web Interface, REST API

Communication Interfaces

Ethernet

Digital I/O connector type

M12 12-pin A-coded, Male (shared with external power)

Digital Inputs

2x opto-isolated, Vin(low)= 0–1.5 V, Vin(high)= 3–25 V

Digital Outputs

3x opto-isolated, 0–48 V DC, max. 350 mA; solid-state opto relay; 1x dedicated as Fault output (NC)

Storage Media

None

Synchronization Modes

Sync In

Imaging & Optical

Automatic Image Adjustment

Linear, manual, PE, DDE, ADE

Color Palettes

Selectable 8-bit

Detector Pitch

15 µm

Detector Type

High Operating Temperature (HOT) MWIR T2SLS

Digital image enhancement

High sensitivity mode (HSM)

Field of view (FOV)

31.5° × 25.5°

f-number

f/2.5

Focal Length

17 mm

Focus

Manual

Image Frequency

30 Hz

Image Modes

IR image, high sensitivity mode (HSM)

IR Resolution

640 × 512

Minimum Focus Distance

60 mm (2.4 in)

Non-Radiometric IR Video

Streaming H.264 or MJPEG over RTSP

Non-radiometric IR video recording

None

Overlay

RTSP only

Radiometric IR video recording

None

Radiometric IR video streaming

GigE Vision

Sensor Cooling

FLIR FL100 Linear cooler

Spectral Range

3.4 μm - 5.1 μm

Thermal Sensitivity/NETD

≤15 mK at 25°C

Zoom

Digital zoom, 1x, 2x, 4x, 8x

Measurement & Analysis

Accuracy

≤100°C ±2°C, >100°C ±2% of reading

Ambient Drift Compensation [with factory cal]

Yes

DC Voltage

Range: 18 V-56 V

Object Temperature Range

-20°C to 200°C (-4°F to 392°F)

General

Box Contents

Camera w/lens; M12 to RJ45F Cable (0.3 m), quick start guide, certificate of calibration

Size [L × W × H]

267 × 76 × 92 mm (10.5 in × 3.0 in × 3.6 in)

Size [L x W x H ] w/o Lens

200 × 76 × 92 mm (7.9 × 3.0 × 3.6 in)

Weight

1.77 kg (3.9 lbs)

Weight [without lens]

1.32 kg (2.9 lbs)

Environmental & Certifications

Directives

EMC: 2014/30/EU, WEEE: 2012/19/EU

EMC

EN55032:2015/A11:2020
EN55035:2017/A11:2020
FCC Part 15, Subpart B ClassA
KC C 9832 and KS C 9835

Encapsulation

IP50

Mounting

With mounting plate - 2 × 1/4"-20 tapped holes, 1 × 3/8"-16; tapped hole, 4 × #10-24 tapped holes Without mounting plate - 6 × #6-32

Operating Temperature Range

-20°C to 50°C (-4°F to 122°F)

Shock

25 g, 6 ms; Half sine; ±500 shocks; X,Y&Z (IAW MIL-STD-810H)

Vibration

10-58 Hz, 0.15 mm; 58-500 Hz, 2 g; 5 cycles, 1 oct/min; X,Y&Z (IAW MIL-STD-810H)

Power

Power Consumption

25 W (cool down)

Power Source

Primary power source: PoE+ type 2 (30 W min)
Optional DC connection: M12 12-pin A-coded, male (shared with Digital I/O)

N/A

N/A