Key Features: FH-Series ID Multispectral Fixed Camera for Perimeter Protection

• Always ready, always working

  Integrates 640 × 512 resolution thermal imaging and a 4K visible sensor into a single camera for optimal performance in any environment or lighting condition

• High-accuracy intrusion detection

  Minimize false alarms and the cost of daily operations by using on-camera video analytics that run on both the visible and thermal spectrum for robust intrusion detection of humans and vehicles

• Easy integration

  Deploy this camera as part of a Teledyne FLIR end-to-end solution or in combination with preferred third-party solutions

Specifications: FH-Series ID Multispectral Fixed Camera for Perimeter Protection

General

Dimensions (L x W x H)

314 x 233 x 124 mm/12.4" x 9.2" x 4.9"

Power Consumption

Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W

Surge Immunity on AC Power Lines

EN 50130-4

Surge Immunity on Signal Lines

EN 50130-4

Compliance & Certifications

Approvals

FCC Part 15 (Subpart B, class A), CE Marked

Certifications

IEC 62368

Compliance

RoHS, WEEE

Environmental

Humidity

0-95% relative humidity

IP Rating (dust & water ingress)

IP66 & IP67

Operating Temperature Range

-40°C to 70°C/-40°F to 158°F

Shock

IEC 60068-2-27

Storage Temperature Range

-50°C to 85°C/-58°F to 185°F

Vibration

IEC 60068-2-64

Measurement & Analysis

Analytics Features

Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier

Analytics Management

Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control

Measurement Accuracy

N/A

Object Temperature Range

N/A

System Integration

Control Input/Output

Input: two dry alarm contacts Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed

Ethernet

100/1000 Mbps

External Analytics Compatible

Yes

Network APIs

NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T

Streaming Resolution

Primary Stream: Thermal: VGA (640x512), QVGA (320 x 256) Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480 Secondary Stream: Thermal: VGA (640x512), QVGA (320 x 256) Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480

Supported Protocols

IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF

Video Over Ethernet

Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal

Thermal Camera

Array Format (Thermal)

640 × 512

Detector Pitch (Thermal)

17 µm

f number (Thermal)

f/1.1

Field of View (FOV) (Thermal)

8.6°×6.6°

Image Uniformity Optimization

Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers

Spectral Range (Thermal)

7.5 µm to 13.5 µm

Thermal AGC Modes

Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting

Thermal AGC Region of Interest [ROI]

Default, Presets and User definable to insure optimal image quality on subjects of interest

Thermal Sensitivity - NETD (Thermal)

<30mK @ 25°C F# 1.0

Video Frame Rate (Thermal)

NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz

Video & Recording

Composite Video NTSC or PAL

Hybrid system with IP & analog video

Local Storage

Support for SD Card (not supplied)

Visible Camera

Array Format (Visible)

4K 2160p (3840 x 2160)

f number (Visible)

2.0

Field of View (FOV) (Visible)

11°×6°

Video Frame Rate (Visible)

30 Hz or less

N/A

N/A