Model: Amprobe 15XP-B Digital Multimeter VolTect trade
Amprobe 15XP-B Digital Multimeter VolTect trade is working accurately to the test point. Almost rugged reliable and trusted product. Confidently you may buy this one for the good performance.
Amprobe 15XP-B is the right choice for electronics engineers and field service technicians, featuring a TTL logic test for digital circuits, a diode test for component-level troubleshooting, a special 2000MΩ measurement range, and an integrated tilt stand for convenience on the bench.
First, for all Tools Bangladesh make sure that the product is 100% original. Then it releases to the market because we are popular by our honest afford.
Key features: Amprobe 15XP-B Digital Multimeter VolTect trade, Non-Contact Voltage Detection
- The 15XP-B is the right choice for electronics engineers, technicians and field service
- Autoranging display for faster measurements
- TTL logic test for digital circuits
- Integrated tilt stand for easy bench use
- Diode test for component level troubleshooting
- Data hold freezes display to “hold” measurement reading
- 600V AC / 600V DC—highest voltage rating in this size of meter
- Special 2000 MΩ measurement range
Specifications: Amprobe 15XP-B Digital Multimeter VolTect trade, Non-Contact Voltage Detection
| FEATURE |
15XP-B |
| DC Voltage |
200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| AC Voltage |
200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| Current AC/DC |
200.0 µA, 2.000 mA, 20.00 mA, 200.0 mA, 2 A |
| Resistance |
200.0 Ω, 2.000 kΩ, 20.00 kΩ, 200.0 kΩ, 2.000 MΩ, 20.00 MΩ, 2000 MΩ |
| Continuity beeper |
• |
| VolTect™ Non-Contact Voltage Detection |
70 VAC → 600 VAC (50 Hz → 60 Hz) |
| Capacitance |
– |
| Frequency |
– |
| Temperature |
– |
| Logic test |
TTL, 20 MHz |
| Battery test |
– |
| Specifications |
| Display: |
3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999 |
| Polarity: |
Automatic, positive implied, negative polarity indication |
| Over-range: |
(OL) or (-OL) is displayed |
| Zero: |
Automatic |
| Low battery indication: |
The + is displayed when the battery voltage drops below the operating level |
| Auto power off: |
Approx. 10 minutes |
| Measurement rate: |
2 times per second, nominal |
| Operating environment: |
0 °C to 50 °C at <70 % R.H. |
| Accuracy: |
Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity |
| Power: |
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| DC Volt ranges: |
200 mV, 2 V, 20 V, 200 V, 600 V
Accuracy: ± (0.5 % rdg + 1 dgt) |
| AC Volts (45 Hz to 500 Hz) Ranges: |
200 mV 2 V, 20 V, 200 V, 600 V
Accuracy: ± (1.5 % rdg + 5 dgts) |
| DC Current ranges: |
200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.0 % rdg + 2 dgt)
2 A, Accuracy ± (2.0 % rdg + 3 dgts) |
| AC Current (45 Hz to 500 Hz) ranges: |
200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.5 % rdg + 5 dgts)
2 A, Accuracy ± (2.5 % rdg + 5 dgts) |
| Resistance: |
200 Ω , 2 kΩ , 20 kΩ , 200 kΩ , 2 MΩ ± (1.0 % rdg + 4 dgts) |
| Resistance: |
2000 MO ± {5.0 % (rdg -10 dgts) +20 dgt} |
| Continuity audible indication: |
Less than 25 Ω |
| Diode test current: |
1.2 mA (approximate) ±(1.5 % rdg + 3 dgts) |
| Logic test: |
TTL |
| Non-contact voltage indicator: |
Sense voltage 70 V to 600 V ac (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges |
For complete specs please download the product datasheet under the “Resources” tab.
Calibration
HVAC/Clean Rooms
Electrical
Temperature Meters
Power & Energy
Mechanical & Maintenance
Pharma, Health & Biomedical
Drone Solution
Networking
Transformer & Relay Testing
Insulation, Resistance and Battery
Fault Testing & Diagnostics
Lightning Protection Solution
Education, Research & Development
Civil Equipment
Renewable Energy
Cleaning and supplies
Power Tools
Safety Tools
Hardwares
Construction Supply
Stationeries
Garden Tools
Accessories
Machines
Hand Tools
