Fluke IDA-5 Infusion Pump Analyzer

• Tests up to four infusion pumps at the same time
• Customizable test templates for quick and standardized testing
• On-board and PC-based automation • Compatible with virtually any type of infusion device
• Real-time snapshots of flow and pressure for immediate issue recognition
• Instantaneous and average flow measurement of up to 1500 ml/hr
• Occlusion pressure measurements to 45 psi • Single-flow, dual-flow (piggyback) and PCA testing
• Auto-start mode enables unit to begin testing only when fluid is detected to maximize accuracy
• Ability to automatically end flow measurement based on user-defined time, volume, or both
• Convenient and easy data entry with plug ’n play, USB-compatible keyboard or barcode scanner
• Built-in memory to save test results for printing or downloading to a computer
• Optional Ansur automation software completely integrates medical device testing, including electrical safety, visual inspection, and other performance parameters for total digital data management.
• Global support network delivering prompt service worldwide

Technical Specifications

Flow Rate Measurement

• Range: 0.1 ml/h to 1500 ml/h (up to 2500 ml/h displayed)

• Accuracy: 1% of reading ±1 Least Significant Digit (LSD) for flows of 16 to 200 ml/h with volumes over 20 ml; otherwise, 2% of reading ±1 LSD for volumes over 10 ml under laboratory conditions.

• Maximum Test Duration: 100 hours

Volume Measurement

• Range: 0.06 ml to 9999 ml

• Accuracy: 1% of reading ±1 LSD for flow rates of 16 ml/h to 200 ml/h with volumes over 20 ml; otherwise, 2% of reading ±1 LSD for volumes over 10 ml under laboratory conditions.

• Maximum Test Duration: 100 hours

PCA Bolus/Dual Flow Measurement

• Minimum Bolus Volume: 0.5 ml

• Resolution: 60 μl increments

• Maximum Test Duration: 100 hours

Pressure Measurement

• Method: Direct measurement at the inlet port

• Range: 0 psi to 45 psi (equivalent to 0 to 310 kPa, 0 to 3.1 bar, or 0 to 3400 mmHg)

• Accuracy: 1% of Full Scale ±1 LSD under laboratory conditions

• Maximum Test Duration: 1 hour

General Specifications

• Operating Voltage: 100 V ac to 240 V ac

• Supply Frequency: 50/60 Hz

• Power Consumption: <50 VA

• Fuses: 20 mm T1.6 A H 250 V x 2

• Dimensions (HxWxD): 30 cm x 20 cm x 20 cm (12 in x 8 in x 8 in)

• Weight: 3.4 kg (approx.)

Click Here for Data Sheet, Specification

Software and Accessories

• HydroGraph™ Graphics Software: Visualize and analyze test data with real-time graphs.

• Ansur Automation Software: Integrates medical device testing, including electrical safety and visual inspection, for total digital data management.

• Plug-and-Play Compatibility: Supports barcode scanners, keyboards, and printers for convenient data entry.