Fluke IDA-1S Infusion Pump Analyzer
Ensure infusion pumps are tested accurately and quickly with real-time results using the IDA-1S One-Channel Infusion Device Analyzer, the newest member of the Fluke Biomedical IDA family. The IDA-1S is a portable, battery-operated instrument that allows for speedy verification of infusion device performance. The IDA-1S measures the flow rate and volume delivered, and the pressure generated in occlusions or blockages of the fluid line. The IDA-1S is based on sophisticated measurement technology trusted by biomedical professionals around the world. It is easy to set up and requires little or no training to use. The IDA-1S can be used to test a wide variety of infusion pumps, and an auto-start feature simplifies syringe pump testing and other tests that have long startup times.
• Integrated carrying handle and lightweight (2.7 lb) for easy portability
• Battery powered with up to 10 hours of continuous operation for on-the-go operation
• LCD touch screen for ease of use
• Average and instantaneous flow measurement
• Occlusion pressure measurements to 45 psi
• Maximize accuracy with Autostart mode enabling unit to begin testing only when fluid is detected
• Compatible with a wide variety of infusion pumps
• Based on technology that is proven and trusted worldwide
• On-board memory allows test results storage instantly
• Hydrograph graphical software to control unit,display results and print results via PC
• Global sales, service and support
Technical Specifications
Flow Rate Measurement
Volume Measurement
Pressure Measurement (Occlusion)
-
Method: Direct inlet pressure sensing
-
Range: 0–45 psi (also displayed in mmHg, bar, kPa)
-
Accuracy: ±1% FS ±1 LSD
General & Environmental Specs
-
Result Storage: Up to ~100 tests; safe in case of power loss
-
Power/Battery:
-
NiMH pack: 4 × Panasonic HHR210AB, 2000 mAh
-
Charger: 100–240 V AC, 50/60 Hz, <20 VA
-
Physical Dimensions: 30 × 17 × 10 cm (12 × 8 × 4 in)
-
Weight: ~1.2 kg (2.7 lb)
-
Operating Temperature: 15–30 °C (59–86 °F)
-
Storage Temperature: –20–+40 °C (–4–104 °F), when dry
-
Humidity: 10–90% non‑condensing
-
Altitude: 0–2,000 m (0–6,500 ft)
Compliance & Certifications
-
Safety Standard: IEC 61010‑1 CAT II, Pollution Degree 2
-
EMC: IEC 61326‑1 (Basic), IEC CISPR 11 Group 1 Class A; suitable for industrial use
-
FCC: CFR47 Part 15 Class A
-
Korea EMC: Class A (industrial)