FLIR A6260 SWIR Camera with InGaAs Detector
The FLIR A6260 SWIR camera offers cold reaction and full of zip range paired later the flexibility of customized windowing and integration time. This InGaAs camera is terribly linear in the 0.9 to 1.7 m sensing waveband, making it the unadulterated tool for high temperature thermal measurements and applications that require measuring through happening to conventional glass. The A6260 offers control on summit of settings such as integration era, though allowing you to synchronize and trigger to outdoor whisk and devices.
Key Features: FLIR A6260 SWIR Camera with InGaAs Detector
- Crisp, High-Resolution Images
The 327,680 (640 x 512) pixel detector offers three user-selectable, 75x factor gain states for imaging bright and low-light scenes.
- Fully Customizable
Tailor controls to unique applications through customizable integration times, frame rates, synchronization, and triggering.
- Accurate Temperature Measurement
Factory or user-calibrate the A6260 to measure temperatures above 400°C when optimized for the 0.6 - 1.7 µm waveband.
Specifications: FLIR A6260 SWIR Camera with InGaAs Detector
Resolution
640 × 512
Pixel Size [Square]
15 µm
Spectral Range
0.9 – 1.7 µm
Detector Type
FLIR indium gallium arsenide (InGaAs)
Camera f-number
Variable using lens iris (lens fixed at f/4 with cal)
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 125 Hz (180 Hz burst)
Integration Time
50 µsec to ~full frame (3.2 msec w/factory calibration)
Standard Temperature Range [with band matched optics]
400°C to 1200°C/752°F to 2192°F (ND1)
Optional Temperature Range [with band matched optics]
600°C to 1500°C/1112°F to 2732°F (ND2); 700°C to 2500°C/1292°F to 4532°F (ND3)
Filter Holder [Warm]
Behind lens mount for standard 1-inch diameter filters
Focus
Manual
Imaging & Optical
Available Lenses
16 mm, 25 mm, 35 mm, 50 mm, 100 mm
Camera f-number
Variable using lens iris (lens fixed at f/4 with cal)
Close-up Lenses/Microscopes
No microscopes available
Filter Holder [Warm]
Behind lens mount for standard 1-inch diameter filters
Image Time Stamp
Yes
Integration Time
50 µsec to ~full frame (3.2 msec w/factory calibration)
NEI [Typical]
8.4E9 Photons/sec/cm2 (Low Gain), 2.9E9 photons/sec/cm2 (Med Gain)
Noise Floor [Typical]
Low Gain: 350e, Med Gain: 56e
On Camera Image Storage
None
Overlay
Fixed configuration, can be turned off
Pixel Clock
100 MHz
Pixel Size [Square]
15 µm
Radiometric Data Streaming
Gigabit Ethernet (GigE Vision)
Readout Modes
Asynchronous integrate while read, asynchronous integrate then read
Readout Type
Snapshot
Sensor Cooling
Single Stage TE Cooler, 30C FPA setpoint
Standard Video
SDI
Standard Video Zoom
Automatic, variable
Subwindow Modes
640 x 512, 320 x 256, 160 x 128, flexible centered windowing down to 32 × 4 (steps of 32 columns, 4 rows)
Thermal Sensitivity_NETD [typical]
N/A
Video Modes
SDI: 720p@50/59.9, 1080p@25/29.9
Measurement & Analysis
Ambient Drift Compensation [with factory cal]
Yes
Optional Temperature Range [with band matched optics]
600°C to 1500°C/1112°F to 2732°F (ND2); 700°C to 2500°C/1292°F to 4532°F (ND3)
Standard Temperature Range [with band matched optics]
400°C to 1200°C/752°F to 2192°F (ND1)
General
Size [L x W x H ] w/o Lens
216 × 102 × 109 mm (8.5 × 4.0 × 4.3 in.)
Calibration
HVAC/Clean Rooms
Electrical
Temperature Meters
Power & Energy
Mechanical & Maintenance
Pharma, Health & Biomedical
Drone Solution
Networking
Transformer & Relay Testing
Insulation, Resistance and Battery
Fault Testing & Diagnostics
Lightning Protection Solution
Education, Research & Development
Civil Equipment
Renewable Energy
Cleaning and supplies
Power Tools
Safety Tools
Hardwares
Construction Supply
Stationeries
Garden Tools
Accessories
Machines
Hand Tools
