Key Features: FH-Series R Multispectral Fixed Camera for Early Fire Detection

• Rapid detection and visual verification

  Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device

• Intelligent alarms

  Detect hot spots and intruders without false alarms with on-board video analytics; make detections based on time of day, business hours, and seasonality using the built-in scheduling tool

• Easy Integration

  Deploy the FH-Series R as part of a Teledyne FLIR end-to-end solution or in combination with preferred third-party solutions

Specifications: FH-Series R Multispectral Fixed Camera for Early Fire DetectionGeneral

Dimensions (L x W x H)

314 x 233 x 124 mm/12.4" x 9.2" x 4.9"

Power Consumption

Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W

Surge Immunity on AC Power Lines

EN 50130-4

Surge Immunity on Signal Lines

EN 50130-4

Compliance & Certifications

Approvals

FCC Part 15 (Subpart B, class A), CE Marked

Certifications

IEC 62368

Compliance

RoHS, WEEE

Environmental

Humidity

0-95% relative humidity

IP Rating (dust & water ingress)

IP66 & IP67

Operating Temperature Range

-40°C to 70°C/-40°F to 158°F

Shock

IEC 60068-2-27

Storage Temperature Range

-50°C to 85°C/-58°F to 185°F

Vibration

IEC 60068-2-64

Measurement & Analysis

Analytics Features

Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier

Analytics Management

Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control

Measurement Accuracy

Target below 100 °C (212 °F): ± 5 °C (±9 °F) accuracy Target below 150 °C (302 °F): ± 5% accuracy Target above 150 °C (302 °F): ± 15% accuracy *Measured at 25°C ambient temperature. Error may be greater at extreme temperatures

Object Temperature Range

High Gain Mode: 0°C to 160°C 32°F to 320°F) Low Gain Mode: 0°C to 380°C (32°F to 716°F)

System Integration

Control Input/Output

Input: two dry alarm contacts Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed

Ethernet

100/1000 Mbps

External Analytics Compatible

Yes

Network APIs

NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T

Streaming Resolution

Primary Stream: Thermal: QVGA (320 x 256) Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480 Secondary Stream: Thermal: QVGA (320 x 256) Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480

Supported Protocols

IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF

Video Over Ethernet

Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal

Thermal Camera

Array Format (Thermal)

320 × 256

Detector Pitch (Thermal)

17 µm

f number (Thermal)

f/1.1

Field of View (FOV) (Thermal)

13° × 10°

Image Uniformity Optimization

Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers

Spectral Range (Thermal)

7.5 µm to 13.5 µm

Thermal AGC Modes

Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting

Thermal AGC Region of Interest [ROI]

Default, Presets and User definable to insure optimal image quality on subjects of interest

Thermal Sensitivity - NETD (Thermal)

<35mK @ 25°C F# 1.0

Video Frame Rate (Thermal)

NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz

Video & Recording

Composite Video NTSC or PAL

Hybrid system with IP & analog video

Local Storage

Support for SD Card (not supplied)

Visible Camera

Array Format (Visible)

4K 2160p (3840 x 2160)

f number (Visible)

1.8

Field of View (FOV) (Visible)

18° × 10°

Video Frame Rate (Visible)

30 Hz or less

N/A

N/A