DJI AGRAS T10:
The DJI AGRAS T10 is a versatile agricultural drone designed to enhance efficiency in farming operations. With a maximum payload capacity of 10 kg, it is ideal for a variety of tasks, including crop spraying, fertilization, and monitoring. The T10 features a high-precision spraying system that ensures even and accurate distribution of fertilizers and pesticides, promoting healthier crops and improved yields. It comes equipped with advanced sensors and a high-resolution camera for real-time imaging and data collection, enabling farmers to effectively monitor crop health and make informed decisions. The drone’s user-friendly interface, combined with intelligent flight modes such as automated mission planning and obstacle avoidance, makes it accessible for both novice and experienced users. With a robust design and efficient flight time, the DJI AGRAS T10 is an essential tool for modern agriculture, helping farmers optimize their practices and increase productivity.
If you’re searching for the best price on DJI agriculture drones in Bangladesh, look no further! Tools Bangladesh offers exceptional value with high-end features and capabilities. Elevate your farming efficiency with our advanced drones designed to meet your agricultural needs.
Key Features:
- 8L Spray Tank
- Spherical Radar System
- Overall IP67 Water Resistance
- Dual FPV Cameras for Monitoring
- High Precision Operation
- Smart Agriculture Cloud Platform
Specifications:
Features
-
Level gauge
-
Single-point level gauge
-
Up-looking radar module
-
√
-
Flight dotting function
-
√
Drone parameters
-
Rated take-off weight
-
24.8 kg (near sea level)
-
Hovering precision (with good GNSS signal)
-
With D-RTK enabled:
±10 cm (horizontal) and ±10 cm (vertical)
With D-RTK disabled:
±0.6m (horizontal) and ±0.3m (vertical) (with the radar function enabled: ±0.1 m)
-
RTK/GNSS frequency bands
-
RTK: GPS L1/L2, GLONASS F1/F2, BeiDou B1/B2, and Galileo E1/E5
GNSS: GPS L1, GLONASS F1, and Galileo E1
Rack parameters
-
Maximum rotor distance
-
1,480 mm
-
Dimensions
-
1,958 mm × 1,833 mm × 553 mm (with arms and blades extended)
1,232 mm × 1,112 mm × 553 mm (with arms extended and blades folded)
600 mm × 665 mm × 580 mm (with arms folded)
Power system - Motor
-
Maximum pulling force
-
11.2 kg/rotor
-
Maximum power
-
2,500 W/rotor
Power system - Propellers
-
Diameter × pitch
-
33×9 inch
-
Weight (a single blade)
-
92 g
Power system - ESC
FPV camera
-
Resolution
-
1,280×720 15-30 fps
FPV spotlight
Spraying system - Operation tank
-
Operation tank volume
-
8 L at full load
-
Operating load
-
8 kg at full load
Spraying system - Nozzles
-
Diameter of atomized particle
-
XR11001VS : 130 - 250 μm
XR110015VS : 170 - 265 μm
XR11002VS: 190 - 300 μm
(depending on the actual operating environment, spraying flow and other factors)
Spraying system - Water pump
-
Water pump model
-
Diaphragm pump
-
Maximum flow
-
1.5 L/min ×1
Spraying system - Flowmeter
-
Flow measurement range
-
0.25 - 20 L/min
-
Flow measurement error
-
< ±2%
Omnidirectional obstacle avoidance radar
-
Obstacle avoidance system
-
Perceivable distance: 1.5 - 30m
FOV: 360° (horizontal), ±15° (vertical)
Conditions of use: The relative flight height of the drone is above 1.5m and the speed below 7 m/s
Safe distance: 2.5m (the distance between the tip of the blade and the obstacle after the drone is braked and hovering stably)
Obstacle avoidance direction: Horizontally omnidirectional obstacle avoidance
Up-looking radar
-
Overhead obstacle avoidance
-
Perceivable distance: 1.5 - 10m
FOV: 80°
Conditions of use: The drone flies for a relative distance over 1.5 m in the mode of take-off, landing and route climb mode
Safe distance: 2m (the distance between the obstacle and the highest point on the top of the drone)
Obstacle avoidance direction: Above the drone
Battery
-
Model
-
BAX501-9500mAh-51.8V
Remote control
-
Bluetooth protocol
-
Bluetooth 4.2
-
Positioning
-
GPS + GLONASS
-
Display
-
5.5-inch screen with a resolution of 1,920×1,080 and brightness of 1,000 cd/m², and Android OS
-
Operating memory (RAM)
-
4GB LPDDR4
Built-in battery of remote control
External smart battery of remote control
External smart battery charging manager of remote control
-
Input voltage
-
17.3 - 26.2 V
Power adapter of external smart battery charging manager
-
Input voltage
-
100 to 240V and 50/60 Hz
T-Series Spreading System 3.0 (8kg)
-
Maximum opening area
-
44.6 cm²
-
Input voltage
-
Power: 60V
Control:15V
-
Maximum power
-
60V@250W
15V@50W
-
Maximum rotation speed
-
1,300 RPM
T10 smart charging manager
-
Dimensions
-
300×280×230 mm
-
Input voltage
-
100-264 Vac
-
Charging time
-
7 to 10 min
-
Protection functions
-
Over-temperature, over-voltage, under-voltage, short-circuit, and fan stall protection