Specifications:
Number of channels
24 chs + trigger (AUX ch) -
2 units can be serialized for a total of 48 chs
Data Conversion
24 real bits Sigma-Delta ADC (compatible with analog geophones of any resonance
frequency)
Sampling intervals
Single acquisition (active and passive):
-from 1 to 6 chs : up to 31.25 microsec/32000 Hz
-from 7 to 12 chs : up to 62.5 microsec/16000 Hz
-from 13 to 24 chs : up to 125 microsec/8000 Hz
Continuous acquisitions (passive):
-from 1 to 3 chs : up to 500 microsec/2000 Hz
-from 4 to 6 chs : up to 1 millisec/1000 Hz
-from 7 to 12 chs : up to 2ms /500 Hz
-from 13 a 24 chs : up to 4ms /250 Hz
Acquisition length
27500 samples @ 24 chs (+aux)
174500 samples @ 3 chs (+aux)
Unlimited samples for continuous acquisitions
Preamp. gain
LOW (0dB) - HIGH (52dB), software selectable
Stacking
Unlimited number of stackings
Input impedance
2MOhm // 22nF
Dynamic Range
144dB (system); >117db (instantaneous, measured @1ksps
Distortion
0.007% @16kHz
Bandwidth -3dB
Bandwidth +/- 0.1dB
From DC to 6.8kHz@32ksps - from DC to 0.21 kHz@1ksps
From DC to 3.5 kHz@32ksps - from DC to 0.11 kHz@1ksps
Filters
Low Pass:125-200-500-1000Hz
High Pass: 10-20-30-40-50-70-100-150-200-300-400Hz
Notch Filter
50-60Hz + harmonics
Trigger
Normally closed contact, normally open contact (e.g. with explosive),
analog signal (starter geophone, hammer switch), TTL triggering.
Trigger sensibility adjustable via software
Trace Display
Wiggle-trace / variable area
Noise-monitor
All channels + trigger; real time display
AUX channel
1x (for trigger or any other input signal)
Communication interface
1x USB 2.0 to external PC (not included)
Data format
SEG2 (other formats available on request)
Power supply
5VDC from USB, 0.25A
Operating/Storage
Temp. from -30°C to + 80°C
Humidity
80% relative humidity, non condensing
Dimension and weight
24cm x19.5cm x11cm, 2kg Shock-resitant PELI CASE IP67