Model: Fluke 1664 FC Installation Multifunction Testers
Fluke 1664 FC Installation Multifunction Tester is Allows you to share test accurate results in real-time over your smartphone via Fluke Connect Measurements.
The 1664 FC puts a lot of testing skill in your hands to speedily and efficiently test to all local regulations, protect appliances and portion exam results in precise epoch on the depth of your smartphone.
The Fluke 1664 FC is without help tester considering "Insulation PreTest" that stops the insulation exam and provides a visual caution if it detects that an appliance is associated with the system below test. This helps you avoid potentially deafening and costly mistakes that can cause broken to your customer's peripheral equipment.
Auto Test performs occurring to seven installation tests in one sequence, ensuring submission as soon as local installation regulations. This reduces the number of manual cronies, as a result decreasing the possibility of errors and reducing test period.
Iconic Engineering Limited is an electronic tools related website and that is the largest electronic tools supplier in Bangladesh.
Key features: Fluke 1664 FC Installation Multifunction Testers
Multifunction tester that tests to all local regulations
- Includes "Insulation Pre-test" that detects when appliances are connected to the system and stops the test
- Runs seven installation tests automatically in one sequence with a single connection through Auto Test
- Allows you to share test results in real time over your smartphone via Fluke Connect Measurements
Specifications: Fluke 1664 FC Installation Multifunction Testers
| AC voltage measurement |
| Range |
500 V |
| Resolution |
0.1 V |
| Accuracy 45 Hz – 66 Hz |
0.8% + 3 |
| Input impedance |
360 kΩ |
| Overload protection |
660 V rms |
| Continuity testing (RLO) |
| Range (autoranging) |
20 Ω / 200 Ω / 2000 Ω |
| Resolution |
0.01 Ω / 0.1 Ω / 1 Ω |
| Open Circuit Voltage |
>4 V |
| Insulation resistance measurement (RISO) |
| Test voltages |
50-100-250-500-1000 V |
| Accuracy of tTest voltage (at rated test current) |
+10%, -0% |
| Test voltage |
50 V
100 V
250 V
500 V
1000 V |
| Insulation resistance range |
20 MΩ /50 MΩ
20 MΩ / 100 MΩ
20 MΩ / 200 MΩ
20 MΩ / 200 MΩ / 500 MΩ
20 MΩ / 200 MΩ / 1000 MΩ |
| Resolution |
0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ / 1 MΩ
0.01 MΩ / 0.1 MΩ / 1 MΩ |
| Test current |
1 mA @ 50 kΩ
1 mA @ 100 kΩ
1 mA @ 250 kΩ
1 mA @ 500 kΩ
1 mA @ 1 MΩ |
| Loop and line impedance (ZI) |
| Range |
10 Ω / 0.001 Ω / High current mΩ mode |
| Resolution |
0.01 Ω / 0.1 Ω / 1 Ω |
| Prospective earth fault current, PSC test |
| Range |
1000 A / 10 kA (50 kA) |
| Resolution |
1 A / 0.1 kA |
| Computation |
Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively. |
| RCD testing, RCD types tested |
| RCD Type |
AC¹
G²,S³ |
| Model 1664 |
A, AC, B5, S |
| Notes |
¹Responds to AC
²General, no delay
³Time delay
4Responds to pulsed signal
5Responds to smooth DC signal |
| Tripping speed test (ΔT) |
| Current settings¹ |
10-30-100-300-500-1000 mA – VAR
10-30-100 mA |
| Multiplier |
x ½, x 1
x 5 |
| Measurement range |
RCD Type G |
310 ms
50 ms |
| RCD Type S |
510 ms
160 ms |
| Notes |
¹1000 mA type AC only
700 mA maximum type A in VAR mode
VAR mode not available for type B. |
| RCD/FI-Tripping Current Measurement/Ramp Test (IΔN) |
| Current range |
30% to 110% of RCD rated current¹ |
| Step size |
10% of IΔN² |
| Dwell time |
Type G |
300 ms/step |
| Type S |
500 ms/step |
| Measurement accuracy |
±5% |
| Specified trip current ranges (EN 61008-1) |
50% to 100% for Type AC
35% to 140% for Type A (>10 mA)
35% to 200% for Type A (≤10 mA)
50% to 200% for Type B
²5% for Type B |
| Notes |
¹30% to 150% for Type A IΔN > 10 mA
30% to 210% for Type A IΔN = 10 mA
20% to 210% for Type B |
| Earth Resistance Test (RE) |
| Range |
200 Ω / 2000 Ω |
| Resolution |
0.1 Ω / 1Ω |
| Frequency |
128 Hz |
| Output Voltage |
25 V |
| Phase Sequence Indication |
| Icon |
 Phase Sequence indicator is active. |
| General Specifications |
| Size (L x W x H) |
10 x 25 x 12.5 cm |
| Weight (incl. batteries) |
1.3 Kg |
| Battery size, quantity |
Type AA, 6 ea. |
| Sealing |
IP-40 |
| Safety |
Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition |
| Overvoltage |
CAT III / 500V; CAT IV 300V |
| Performance |
EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition |
Includes: Fluke 1664 FC Installation Multifunction Testers
- 6x AA (IEC LR6) cell batteries
- C1600 hard carrying case
- Zero adapter
- Heavy duty mains cord
- STD standard test lead set
- Padded carrying and waist strap
- Quick reference guide
- TP165X remote control probe and lead
- User's manual on CD-ROM
Calibration
HVAC/Clean Rooms
Electrical
Temperature Meters
Power & Energy
Mechanical & Maintenance
Pharma, Health & Biomedical
Drone Solution
Networking
Transformer & Relay Testing
Insulation, Resistance and Battery
Fault Testing & Diagnostics
Lightning Protection Solution
Education, Research & Development
Civil Equipment
Renewable Energy
Cleaning and supplies
Power Tools
Safety Tools
Hardwares
Construction Supply
Stationeries
Garden Tools
Accessories
Machines
Hand Tools
